Description
Alloy Shank Hoist Hooks |
|
• Heat treated alloy steel provides strength without bulk or weight
• Pre-drilled boss allows for addition of a latch (order separately).
• Hardness approximately R30c-36c
• Shank hooks are supplied unthreaded. Insufficient thread engagement can result in loss of load.
The following must be observed:
1) Shanks are not intended for internal threading or swaging.
2) To obtain maximum strength threads to be class 2 or better.
3) Thread engagement in nut or object must not be less than one thread diameter.
Dimensions in inches
Item No.
|
WLL. Tons |
Max
Shank
after
machin-
ing
|
Min.
thread
size
(UNC)
|
D
|
F
|
G
|
H
|
J
|
K
|
L
|
O
|
P
|
R
|
T
|
X
|
Y
|
Z
|
Wt/Ea
lbs
|
9-050 | 1 | .53 | 1/2-13 | 3.06 | 1.25 | .87 | 1.05 | .93 | .63 | 5.28 | .93 |
2.12 |
2.35 | .87 | .59 | 2.06 | .69 | .63 |
9-051 | 1.5 | .62 | 5/8-11 | 3.33 | 1.38 | .94 | 1.11 | .97 | .71 | 5.78 | .97 | 2.27 | 2.59 | .97 | .66 | 2.25 | .78 | .85 |
9-052 | 2 | .66 | 5/8-11 | 3.67 | 1.50 | 1.06 | 1.21 | 1.06 | .88 | 6.29 | 1.06 | 2.54 | 2.75 | 1.03 | .72 | 2.50 | 1.00 | 1.38 |
9-053 | 3 | .81 | 3/4-10 | 4.20 | 1.63 | 1.27 | 1.43 | 1.19 | .94 | 7.26 | 1.16 | 2.80 | 3.16 | 1.16 | .88 | 2.84 | 1.00 | 1.92 |
9-055 | 5 | 1.03 | 7/8-9 | 5.11 | 2.00 | 1.44 | 1.63 | 1.50 | 1.31 | 8.63 | 1.41 | 3.47 | 3.85 | 1.53 | 1.16 | 3.34 | 1.25 | 4.02 |
9-057 |
7 |
1.27 |
1-1/8-7 |
6.24 |
2.50 |
1.82 |
2.01 |
1.78 |
1.68 |
10.43 |
1.69 |
4.59 | 4.77 | 1.94 | 1.41 | 3.84 |
1.56 |
7.25 |