Lifting Tongs

Sales Desk

1-800-523-2367

Extension "3"

for Chain Sales

(or 1-219-696-6411)

Fax: 219-696-6413

Timber Lifting Tongs

Only certified and proof tested alloy products should be used for overhead lifting. Dixie Industries upset forges Round Alloy Steel for optimum tensile strength and durability. All Dixie Lifting Tongs are proof loaded to two (2) times the Working Load Limit (WLL) then affixed with a permanent metal identification tag. Written certification is also supplied at time of shipment. Lifting Tongs are supported by either a Screw Pin Shackle or a Nut & Bolt Safety Shackle with a Ring. Tong shape has been designed to provide a sure grip on poles and logs. Painted bright orange for job site identification.

Dia & Max Opening (in)	Item Number	Weight (lbs)	Closed Ht (in) "A"	Overall Ht (in) "C"	Ring Size (in)
3/4 x 16	CM-40008	7.0	7	18 3/4	5/8	$145.09 ea
1 x 20	CM-40218	16.5	9	23 1/4	3/4	$167.49 ea
1 x 25	CM-40228	17.0	10	25 1/4	3/4	$204.78 ea
1-1/4 x 32	CM-40458	36.0	14	31	7/8	$363.43 ea
1-1/2 x 36	CM-40558	50.5	16	37 3/4	1	$684.54 ea

Dia & Max Opening (in)	Item Number	Figure B Working Load Limit - Degree of Opening
		75 degrees		135 degrees		180 degrees
		Jaw Opening (in)	WLL (lbs)	Jaw Opening (in)	WLL (lbs)	Jaw Opening (in)	WLL (lbs)
3/4 x 16	40008	3 1/2	1,500	12	1,000	16	750
1 x 20	40218	6	2,500	17	2,000	20	1,500
1 x 25	40228	7 1/2	2,500	20	2,000	25	1,500
1 1/4x32	40458	8 1/2	3,000	27	2,500	32	2,000
1 1/2x36	40558	12	5,000	32	4,000	36	3,000

Related Products


Skidding Tongs	Skidding Tongs	Timber Carrier

Other Forestry products...